DAEWOO ELECTRONIC COMPONENTS
Production information
Production information

Reliability test facility

Thermal shock TSV-70L-A
Application test Thermal Shock,
Thermal Fatigue Test
Equipment ability -75℃ ~ 200℃(Trans 2min)
Thermo-hygrostat PDR-3KP
Application test HHCO, HHC,
Temperature and humidity Cycle
Equipment ability -30℃~110℃, 30~98%R.H
Thermo-hygrostat PDR-4KP
Application test HHCO, HHC,
Temperature and humidity Cycle
Equipment ability -30℃~110℃, 30~98%R.H
hypsithermal age TD500
Application test Intermittent operation duration,
Continuous operating duration
Equipment ability room temperature~200℃
Thermo-hygrostat EGNX12-6CAL
Application test HHCO, HHC, Temperature and humidity Cycle
Power Temp Cycle
Equipment ability -70℃~200℃, 10~95%R.H
Ozone tester SOZ-6300
Application test Ozone test
Equipment ability room temperature~150 ℃,
Ozone : 0~2 ppm
Bench
Tester		 D21000001
Application test Regulator Operation Test
Equipment ability -40~150℃, heating /Cooling rate :3℃/min
Acceleration
tester		 TPC-211
Application test AUTO CLAVE
Equipment ability Pressure:0.2~2 kg/㎠,(15 PSI), 75~100%R.H.125 ℃
Vibrator TA250-S062
Application test Sine&Random Vibration
Equipment ability Acceleration~65G,
Frequency:2~3500 ㎐
Mechanical
impactor		 SD-4.5HP
Application test Mechanical Shock
Equipment ability Acceleration:MAX. 5000 G
LOAD
DUMP		 NSG-5000
Application test Surge, Electrical Stress
Equipment ability DC 600V MAX
R:30 Ω Max, Pulse발생
Bipolar Power Supply
Application test Voltage intermittent Test
Voltage interruption Test
Equipment ability Voltage : -20V ~ 20V
CURRENT : -20A ~ 20A
Curve
Tracer		 371A
Application test dissection (chip & diode)
Equipment ability 30mW ~ 3kW
Noise Measure System
Application test Noise Measure
Equipment ability Lower limit frequency:340 ㎐,
Measurement frequency : Real Time analysis
고저온
Measure기		 XL-30,DX-41
Application test CAPACITOR Measurement
of high and low temperature characteristics
Equipment ability Temperature : -55~150 ℃
Hot Air Reflow
Application test Hot Air Reflow Soldering
Equipment ability Temperature : room temperature ~ 300 Speed:5~60 cm/min
Ripple generator RG-2000
Application test Ripple test
Equipment ability DC 500 V MAX,
Freq.:120㎐~100 ㎑
Solderability
tester		 MUST SYS.Ⅱ
Application test Solderability test
Equipment ability Temperature:235~300 ℃,
Deposition rate:1~20 mm/s
Classification Test Equipment Major Specification Q'ty Applicable Test ITEM
CLIMATIC
TEST
 Dry Oven
(hypsithermal age )		 Temperature Range: Room Temp . ~ 200 ℃ 15 High Temperature Test
High Temp. Life Test
Humidity Chamber
(Thermo-hygrostat)		 Humidity Range : 30 ~ 98 %
R.H  Heat Up Rate : 45 min(-40 ~ 100 ℃)
Cool Down Rate : 50 min(20 ~ -40 ℃)		 8 Humidity & Humidity Cyclic Test 
Temperature Cyclic Test
Power Temp Cycle
Low Temperature Chamber
 Temperature Range : -70 ~ 100 ℃
Heat Up Rate : 30 min(20 ~ 100 ℃)
Cool Down Rate : 60 min (20 ~ -70 ℃)		 2 Dry Heat Test
Low Temperature Test
Low Temp Operation Test
Pressure Cooker Tester
　		 Temperature Range : 105 ~ 143 ℃
Humidity Range : 75 ~ 100 %
R.H Pressure Range : 0.2 ~2.0 kg/㎝ 2		 2 Acceleration Test
Thermal Shock Tester
 Temperature Range : -70 ~ 200 ℃
Trans Time : 2 min max		 1 Thermal Shock Test
Thermal Fatigue Test
Ozone Tester
 Temperature Range : Room Temp ~ 150 ℃
Ozone : 0~2 ppm		 1 Ozone test
Flammability Tester Flammability Control : 12mm, 20mm, 
Time Control : 9999 s		 1 Flammability Test
Bench Tester Temperature Range : -40 ~ 150 ℃
 heating /Cooling rate : 3 ℃ / min		 1 Regulator Operation Test
Salt Fog Tester Temperature Range : 20 ~ 40 ℃ 
Concentration of Brine : 5 %, 10 %, 15 %		 1 Salt Spray Test
Vaccum Dry Oven Troom ~ 60℃,
Vaccum 0~760 torr		 1 Decompression test
Classification Test Equipment Major Specification Q'ty Applicable Test ITEM
MECHANICAL TEST Vibrator Max. Force : 600 LBS Peak
Max. Acceleration : 65 G
Frequency : 2 Hz ~ 3,500 Hz		 1 Vibration Test(room temperature)
Mechanical Shock Tester Max. Acceleration : 5000 G 1 Shock Test